Compac SuperECO HS Thermosyphon Water Heater
Efficient hot water production designed for warm climates. With a two-circuit buffer tank, corrosion-free design, and ultra-thin high-performance collectors, the Compac SuperECO HS delivers safe, reliable, and cost-effective domestic hot water without the need for a magnesium anode.
The Compac SuperECO HS Thermosyphon Water Heater comes in 3 models:
-
Compac SuperECO 150 Basic
-
Compac SuperECO 200S Basic
-
Compac SuperECO 300 Basic
Domestic
Installations
DHW
Warm
Climates
150,200,300 Liters
5-year
Guarantee
Specifications
Capacity:
143 liters - Compac SuperECO 150 Basic
170 liters - Compac SuperECO 200S Basic
271 liters - Compac SuperECO 300 Basic
Insulation:
50 mm rigid injected polyurethane (density 42 kg/m³)
Diameter: 560 mm
Dimensions:
Length: 1070 mm (150 Basic) | 1235 mm (200S Basic) | 1850 mm (300 Basic)
Material:
Galvanized steel DX51 profiled L37x2.5, treated for outdoor use
V/A Ratio [l/m²]:
76,06 (150 Basic) | 71,43 (150 Basic) | 72,07 (300 Basic)
Accessory Kit
Each model comes complete with accessories:
-
Sambra stopper 18
-
Sambra elbow 18-3/4“
-
Sleeve 18- 3/4”
-
Solar output set 15
-
Silicone gasket 3/4”
-
Sambra joint sleeves 18
-
Safety valves 9, 3 and 8 bar
-
Hoses and insulation
-
Secondary shut-off valve
What is the Compac SuperECO HS Thermosyphon?
The Compac SuperECO HS is a two-circuit thermosyphon water heating system engineered for domestic hot water in warm climates. Built with a removable 316L stainless steel consumption heat exchanger, it ensures durability, consistent performance, and hygiene.
By design, the system eliminates water regeneration, which prevents tank corrosion. It also eliminates the need for a magnesium anode and reduces the risk of diseases by preventing the consumption of accumulated water.
The Compac SuperECO features lightweight, ultra-thin solar collectors that simplify installation and can often be handled by a single installer. This series delivers best-in-class performance in the range of ultra-thin solar collectors.
The Advantages of Using Compac SuperECO HS
Two-circuit buffer tank.
Removable consumption heat exchanger made of 316L stainless steel.
50 mm insulation with rigid injected polyurethane.
As there is no water regeneration, it does not cause corrosion in the tank.
It is not necessary to install a magnesium anode.
The risk of Legionella is reduced as there is no consumption of accumulated water.
The lightest solar collector on the market, it offers the possibility of being operated by a single installer.
In the range of ultra-thin collectors, it is the one with the highest performance.
Steel support frames designed for flat and pitched roofs.
5-year guarantee.
Assembly
The HS Thermosyphon (two circuits) system operates through natural convection, providing efficient hot water circulation without pumps. Its dual-circuit design ensures safe domestic hot water production while maintaining system integrity under pressure.
Note: A polyphosphates filter must be installed for optimal operation.
